Irrigation pressure sensors

Track water pressure with an in-line pressure transducer or use a pressure switch to see when a pump or irrigation line pressurizes. Zenseio™ supplies both for compatible TeleFarm™ stations.

Monitoring equipment attached to a blue irrigation pipe beside an orchard

01 / Irrigation pressure sensors

Choose how to monitor irrigation pressure

Use a transducer to follow pressure changes during an irrigation run and help decide when a line, valve or pump needs inspection. Use a switch to monitor when the line reaches a set pressure or loses pressure.

02 / Irrigation pressure sensors

Pressure transducer specifications

This in-line transducer measures water pressure and sends a voltage reading to a supported TeleFarm™ input. Confirm fit for the intended pressure, pipe connection and station input.

Pressure transducer supplied by Zenseio
FeatureDetails
Measuring range0–100 psi.
Output signal0–10 V analog voltage.
Pipe fitting¼-inch NPT male thread.
Cable8 ft cable.
Pressure transducer supplied by Zenseio, with a threaded fitting and attached cable

03 / Irrigation pressure sensors

Pressure switch specifications

This in-line switch changes state when the line reaches its activation pressure and resets at a lower pressure. Connect it to a compatible TeleFarm™ input to monitor when the line pressurizes and loses pressure.

Pressure switch supplied by Zenseio
FeatureDetails
On / off14 psi on, 8 psi off.
Contact typeNormally closed.
Pipe fitting¼-inch NPT male thread.
Cable6.5 ft cable.
BaseBrass.
Pressure switch with a black housing, brass threaded fitting and attached cable

04 / Irrigation pressure sensors

Use the pressure sensor that fits your project

You can use a compatible pressure sensor you already own or buy from another supplier. Check the pressure range, pipe fitting, output signal and any power requirements against your installation and station.